MARKIT – startech.com 1:1 hard drive duplicator and eraser for

Código: SATSASDUPE11

Marca: StarTech

Garantia: 12 - 24 Meses

Imagems com fins ilustrativos somente

Estoque	Qtd	Entrega estimada	Preço
IMXDK	1	02/07/2024 ~ 4 semanas	9.508,61
DE168	1	04/07/2024 ~ 4 semanas	10.064,34
DK060	2	23/07/2024 ~ 4 semanas	11.639,77
DK060	0	~ 4 semanas	11.639,77
DK773	1	31/07/2024 ~ 4 semanas	12.978,79
Mostre mais Mostre menos

Comparar

Encontrar similares

Product Description: StarTech.com 1:1 Hard Drive Duplicator and Eraser for 2.5"/ 3.5" SATA (I/II/III) & SAS (I/II) HDD SSD - LCD & RS-232 - Cloner & Wiper (SATSASDUPE11) - solid state / hard drive duplicator
Device Type: Solid state / hard drive duplicator
Colour: Black
Installed Devices / Modules Qty: 1 (max)
Supported Drives: SATA-600 / SAS-2
Localisation: Australia, Japan, North America, United Kingdom, Europe
Built-in Devices: Status LCD
Storage Controller: SAS (SATA 6Gb/s / SAS 6Gb/s)
Hard Drive: No HDD
Power: AC 120/230 V
Dimensions (WxDxH): 9 cm x 19.4 cm x 3.5 cm
Weight: 700 g
Manufacturer Warranty: 2-year warranty

Device Type: Solid state / hard drive duplicator
Enclosure Colour: Black
Localisation: Australia, Japan, North America, United Kingdom, Europe
Built-in Devices: Status LCD
Supported Devices / Modules Qty: 1
Supported Drives: SATA-600 / SAS-2
Type: SAS
Interface Type: SATA 6Gb/s / SAS 6Gb/s
Type: No HDD
Interfaces: 1 x USB 3.0 - 9 pin USB Type A ¦ 1 x serial RS-232 - 9 pin D-Sub (DB-9) (male) ¦ 2 x SAS - 29 pin internal SAS (SFF-8482)
Compliant Standards: FCC, RoHS
Power Device: External power adapter
Voltage Required: AC 120/230 V
Width: 9 cm
Depth: 19.4 cm
Height: 3.5 cm
Weight: 700 g
Service & Support: Limited warranty - 2 years
Min Operating Temperature: 5 °C
Max Operating Temperature: 45 °C
Humidity Range Operating: 20 - 80%

Product parameters