D-Link DGE-528T - Adaptador de red - PCI perfil bajo - Gigabit Ethernet

Codi DGE-528T
Garantia Desconegut
Imatges només amb fins il·lustratius
EL producte no està disponible ara, però podeu enviar-nos una sol·licitud i el buscarem per vosaltres.
Sol·liciteu-ne la oferta

Descripció de màrqueting

The D-Link DGE-528T is a high-performance 10/100/1000Mbps copper Gigabit PCI card for desktop PC. Installable in a PC equipped with PCI expansion slots, this card turns a desktop computer into a high-bandwidth Gigabit workstation or a server running at 2000Mbps full-duplex speed.
Capable of running at full-duplex Gigabit speed, this card gives your PC 2000Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation.
The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance and security.
Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC and allows users to initiate action at irregular times and from distant locations.
The card's embedded flow control and independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data.
Using a single chip solution, this card is very small in size and consumes very little power of your computer system.

Punts de venda clau

  • Copper gigabit connection for PC
  • 32-bit 33/66MHz clock speed PCI bus master operation
  • Built-in 72K FIFO buffer to reduce overhead of memory transfers
  • 802.3x flow control, auto MDI/MDIX support
  • Supports ACPI 2.0 WOL power management
  • Supports 802.1Q VLAN tagging, 802.1p priority queues
  • Supports up to 7Kbytes jumbo frames
  • Cable diagnostics utility provided
  • Very small size, very low power consumption

Característiques del producte

  • High-performance gigabit speed
    Capable of running at full-duplex gigabit speed, this card gives your PC 2000Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation.
  • VLAN to improve performance and security
    The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with a VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance and security.
  • Wake-On-LAN for power management
    Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC and allows users to initiate action at irregular times and from distant locations.
  • Flow control to minimize packet loss
    The card's embedded flow control and independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data.
  • Small form factor, lower power requirement
    Using a single chip solution, this card is very small in size and consumes very little power of your computer system.

Descripción del producto
D-Link DGE-528T - adaptador de red - PCI - Gigabit Ethernet
Tipo de dispositivo
Adaptador de red
Factor de forma
Tarjeta de inserción - perfil bajo
Tipo de interfaz (bus)
PCI
Revisión de especificación PCI
PCI 2.2
Puertos
Gigabit Ethernet
Tipo de cableado
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Protocolo de interconexión de datos
10Mb LAN, 100Mb LAN, 1GbE
Velocidad de transferencia de datos
1 Gbps
Cumplimiento de normas
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Requisitos del sistema
Microsoft Windows NT 4.0, Novell NetWare 5.x, Apple MacOS X, Novell NetWare 6.x, Linux 2.2.x, Linux 2.4.x, Microsoft Windows 98/ME/2000/XP
Certificado Microsoft
Funciona con Windows Vista
Tipo de dispositivo
Adaptador de red
Factor de forma
Tarjeta de inserción - perfil bajo
Tipo de interfaz (bus)
PCI
Revisión de especificación PCI
PCI 2.2
Puertos
Gigabit Ethernet
Tecnología de conectividad
Cableado
Tipo de cableado
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Protocolo de interconexión de datos
Ethernet, Fast Ethernet, Gigabit Ethernet
Velocidad de transferencia de datos
1 Gbps
Indicadores de estado
Velocidad de transmisión del puerto, modo puerto duplex, enlace/actividad
Características
Control de flujo, capacidad duplex, auto-sensor por dispositivo, negociación automática, soporte VLAN, WOL, señal ascendente automática (MDI/MDI-X automático)
Cumplimiento de normas
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Interfaces
1 x 1000Base-T - RJ-45
Ranuras compatibles
1 x PCI - bajo perfil
Accesorios incluidos
Soporte de bajo perfil
Funciona con Windows Vista
Las aplicaciones y dispositivos con el logotipo "Funciona con Windows Vista" se han probado para garantizar su compatibilidad básica con un PC.
Cumplimiento de normas
Plug and Play, ACPI 2.0, certificado FCC Clase B, VCCI Class B ITE
Sistema operativo requerido
Microsoft Windows NT 4.0, Novell NetWare 5.x, Apple MacOS X, Novell NetWare 6.x, Linux 2.2.x, Linux 2.4.x, Microsoft Windows 98/ME/2000/XP
Requisitos adicionales
Ranura PCI
Temperatura mínima de funcionamiento
0 °C
Temperatura máxima de funcionamiento
50 °C
Ámbito de humedad de funcionamiento
10 - 90%