D-Link DGE-528T - Adapter sieciowy - PCI niski profil - Gigabit Ethernet

Kod produktu DGE-528T
Gwarancja Nieznany
Zdjęcia tylko dla celów ilustracyjnych!
Produkt czasowo niedostępny
Zapytaj o ofertę

Opis producenta

The D-Link DGE-528T is a high-performance 10/100/1000Mbps copper Gigabit PCI card for desktop PC. Installable in a PC equipped with PCI expansion slots, this card turns a desktop computer into a high-bandwidth Gigabit workstation or a server running at 2000Mbps full-duplex speed.
Capable of running at full-duplex Gigabit speed, this card gives your PC 2000Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation.
The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance and security.
Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC and allows users to initiate action at irregular times and from distant locations.
The card's embedded flow control and independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data.
Using a single chip solution, this card is very small in size and consumes very little power of your computer system.

Kluczowe zalety

  • Copper gigabit connection for PC
  • 32-bit 33/66MHz clock speed PCI bus master operation
  • Built-in 72K FIFO buffer to reduce overhead of memory transfers
  • 802.3x flow control, auto MDI/MDIX support
  • Supports ACPI 2.0 WOL power management
  • Supports 802.1Q VLAN tagging, 802.1p priority queues
  • Supports up to 7Kbytes jumbo frames
  • Cable diagnostics utility provided
  • Very small size, very low power consumption

Funkcje produktu

  • High-performance gigabit speed
    Capable of running at full-duplex gigabit speed, this card gives your PC 2000Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation.
  • VLAN to improve performance and security
    The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with a VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance and security.
  • Wake-On-LAN for power management
    Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC and allows users to initiate action at irregular times and from distant locations.
  • Flow control to minimize packet loss
    The card's embedded flow control and independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data.
  • Small form factor, lower power requirement
    Using a single chip solution, this card is very small in size and consumes very little power of your computer system.

Opis produktu
D-Link DGE-528T - adapter sieciowy - PCI - Gigabit Ethernet
Rodzaj urządzenia
Adapter sieciowy
Typ obudowy
Karta wkładana do gniazda - niski profil
Typ interfejsu (szyny)
PCI
Wersja specyfikacji PCI
PCI 2.2
Porty
Gigabit Ethernet
Rodzaj okablowania
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Protokół komunkacyjny danych
10Mb LAN, 100Mb LAN, 1GbE
Szybkość transmisji danych
1 Gbps
Zgodność z normami
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Wymagania systemowe
Microsoft Windows NT 4.0, Novell NetWare 5.x, Apple MacOS X, Novell NetWare 6.x, Linux 2.2.x, Linux 2.4.x, Microsoft Windows 98/ME/2000/XP
Gotowość
Works with Windows Vista
Rodzaj urządzenia
Adapter sieciowy
Typ obudowy
Karta wkładana do gniazda - niski profil
Typ interfejsu (szyny)
PCI
Wersja specyfikacji PCI
PCI 2.2
Porty
Gigabit Ethernet
Technologia podłączania
Przewodowa
Rodzaj okablowania
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
Protokół komunkacyjny danych
Ethernet, Fast Ethernet, Gigabit Ethernet
Szybkość transmisji danych
1 Gbps
Wskaźniki statusu
Szybkość transmisji portu, tryb dupleksu portu, łącze/aktywność
Cechy
Sterowanie przepływem, możliwy pełen dupleks, automatyczne wykrywanie urządzenia, autonegocjacja, obsługa VLAN, WOL, automatyczna funkcja uplink (auto MDI/MDI-X)
Zgodność z normami
IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Interfejsy
1 x 1000Base-T - RJ-45
Zgodne sloty
1 x PCI - niskoprofilowany
Akcesoria w zestawie
Wspornik niskoprofilowy
Works with Windows Vista
Logo "Works with Windows Vista" jest oznaczeniem potwierdzającym zgodność dla aplikacji i urządzeń, które pomyślnie ukończyły program testów sprawdzających kompatybilność podstawową z systemem Windows Vista.
Zgodność z normami
Plug and Play, ACPI 2.0, certyfikat FCC Class B, VCCI Class B ITE
Wymagany system operacyjny
Microsoft Windows NT 4.0, Novell NetWare 5.x, Apple MacOS X, Novell NetWare 6.x, Linux 2.2.x, Linux 2.4.x, Microsoft Windows 98/ME/2000/XP
Dodatkowe wymagania
Slot PCI
Minimalna temperatura pracy
0 °C
Maksymalna temperatura pracy
50 °C
Dopuszczalna wilgotność
10 - 90%