Opis marketinga

This analog turntable, which supports MC balanced output, features a hybrid chassis that combines synthetic marble, washi paper and MDF materials along with a 9-inch S-shaped universal arm that utilizes a knife-edge bearing.
Turntables are the stages for drawing out the passion of the artists and the magic of their engineers that have been infused into records. TN-5BB is a truly worthy stage that achieves functional suppression of unwanted vibrations as well a stately and modern design.
Using the built-in XLR jacks to team up with a phono amplifier that supports balanced connection, the slightest signals transmitted by the cartridge can be re-created with even greater intensity.
The knife-edge tone arm, which is an SAEC×TEAC collaboration, is another component that further enhances this musical stage. The 20 mm thick acrylic platter is driven by the Platter Rotation Sensing Servo System (PRS3).
Are you ready to experience the sound the artists and engineers really wanted you to hear?

Ključne prednosti

• Rotation speeds of 33-⅓, 45 and 78 RPM supported
• Platter Rotation Sensing Servo System (PRS3)
• Static-balanced knife-edge-bearing tone arm
• VTA adjustment (tone arm height adjustment) function (+6 mm)
• Anti-skating function
• Powered arm lifter
• Non-contact detection automatic arm lift function (can be turned on/off)
• XLR balanced output connectors
• Unbalanced RCA output connectors
• GND connector
• Height-adjustable machined aluminum feet at four points
• Acrylic dust cover

Karakteristike proizvoda

• Hybrid chassis with multi-material makeup suppresses unwanted vibrations
  The chassis has a multilayer structure combining a heavy 36mm MDF baseplate with high internal loss and a 12mm synthetic marble with outstanding rigidity. Great feedback resistance has been realized with this excellent rigidity and vibration suppression. The tone arm and platter are mounted on the synthetic marble top plate while the motor, which causes vibration, is mounted to the MDF base plate. These separate structures using these materials as dampers isolate the tone arm and motor from each other. An overall structure with outstanding stillness has been realized that reduces the transmission of vibrations from the motor to the tone arm.
• PRS3 belt drive structure supports accurate and stable platter rotation
  Ideally, once started, platter rotation would continue by its own weight and inertia, but this is impossible, of course. TN-5BB uses the belt drive method with a flat belt that transmits the power of the DC motor to the outer circumference of the platter. An optical sensor in the bottom of the platter detects the platter rotation speed, and an automatic rotation adjustment mechanism applies a servo to the motor in response. This Platter Rotation Sensing Servo System (PRS3) realizes high rotation precision that would be difficult to achieve with just inertia and a motor. Supporting three speeds, 33-⅓, 45 and 78 rpm, this turntable can play back old records as well as 78rpm records with high audio quality.
• 20 mm thick acrylic platter
  Acrylic with excellent levelness and internal loss is used for the platter. The 20 mm thick acrylic has 1.7kg weight and realizes high inertial momentum. The polyvinyl material used in records easily takes on negative electrical charges. Acrylic has this same property, but these materials are relatively close in triboelectric series. This provides the advantage of making electrification difficult even if they directly rub against each other. Records can be placed directly on the platter without using a turntable sheet, allowing enjoyment of their clear sound.
• Reliable tracking realized with knife-edge tone arm that is an SAEC × Teac collaboration
  This knife-edge tone arm was created in collaboration with SAEC, a Japanese brand with 40 years of tonearm design experience. Using a stainless steel knife-edge bearing for the vertical movable part, Teac has realized record groove tracking that is highly sensitive and reliable. Furthermore, for the lateral movable part, a conventional structure that has a ball bearing at one point for support has been replaced with a structure that uses Japanese-made high-precision ball bearings at two points for support. The height of the tone arm base can be adjusted. The Vertical Tracking Angle (VTA) can be adjusted in a 6mm range and optimized for cartridges of various heights.
• Automatic arm lifting when playback ends
  Using a powered arm lifter enables raising and lowering the arm with a single button and also employs a function that automatically lifts the arm by a contact-less optical sensor after playback ends. The automatic arm lifting function can be canceled when playing records that do not conform to standards.