StarTech.com SATA to USB Cable - USB 3.0 to 2.5" SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB) - Storage controller - 2.5" - SATA 6Gb/s - USB 3.0

Cod USB3S2SAT3CB
Marcă StarTech
Garanţie! 3 - 24 Luni
Manufacturer (by 1WorldSync)
 
24 Luni
ESPPT
 
Necunoscut
TDPT1
 
Necunoscut
DK773
 
3 Luni
DE168
 
Necunoscut
IMES1
 
Necunoscut
DE712
 
Necunoscut
VALES
 
Necunoscut
Doar pentru scopuri ilustrative.
Stoc Cantitate Livrare estimată Preţ
TVA
ESPPT 71 25.11.2024 4 săptămâni 16,62
TDPT1 9 20.11.2024 4 săptămâni 17,90
DK773 4 22.11.2024 4 săptămâni 23,34
DE168 133 25.11.2024 4 săptămâni 24,34
IMES1 47 22.11.2024 4 săptămâni 29,47
DE712 133 29.11.2024 4 săptămâni 32,72
DK773  657  17.12.2024 4 săptămâni 23,34
VALES 0 4 săptămâni 30,75

Descriere Markit

This SATA to USB cable is an external drive adapter that gives you quick and easy access to a SATA drive through the USB-A port on a laptop.
This SATA solid-state (SSD) or hard drive (HDD) adapter lets you upgrade to an external 2.5" SATA SSD or HDD.
The cable lets you: Add drive space; Perform backups; Create disk images; Implement data recovery; Transfer content between the drive and the laptop.
The cable supports USB 3.0 data transfer speeds of 5Gbps. But, you can experience transfer speeds up to 70% faster than conventional USB 3.0, when connected to a computer that also supports UASP. With UASP you can utilize the full potential of a SATA III SSD or HDD. UASP is supported in Windows 8, Mac OS X (10.8 or above), and Linux.
In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing, UASP also shows an 80% reduction in required processor resources.
The SATA to USB cable is a portable solution that tucks away nicely in a laptop bag - no external power is required. The cable lets you easily swap between drives with no need to install the drive inside an enclosure. It's plug-and-play and doesn't require drivers.

Product Description
StarTech.com SATA to USB Cable - USB 3.0 to 2.5" SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB) - storage controller - SATA 6Gb/s - USB 3.0
Device Type
Storage controller - external
Bus Type
USB 3.0
Hard Drive Form Factor Compatibility
2.5"
Interface
SATA 6Gb/s
Data Transfer Rate
6 Gbit/s
Supported Devices
Hard drive, solid state drive
System Requirements
Linux, Apple MacOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Windows 8 (32/64 bits), Windows 8.1 (32/64 bits)
Dimensions (WxDxH)
4.5 cm x 50 cm x 1 cm
Weight
189 g
Manufacturer Warranty
2-year warranty
Device Type
Storage controller - external
Hard Drive Form Factor Compatibility
2.5"
Host Bus
USB 3.0
Interface
SATA 6Gb/s
Data Transfer Rate
6 Gbit/s
Supported Devices
Hard drive, solid state drive
Processor
ASMedia ASM1051E
Interfaces
1 x SATA 6Gb/s - SATA combo
Connections
1 x USB 3.0 - 9 pin USB Type B
Cables Included
1 x USB cable - external
Compliant Standards
FCC, RoHS
OS Required
Linux, Apple MacOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Windows 8 (32/64 bits), Windows 8.1 (32/64 bits)
Service & Support
Limited warranty - 2 years
Width
4.5 cm
Depth
50 cm
Height
1 cm
Weight
189 g
Min Operating Temperature
0 °C
Max Operating Temperature
60 °C
Humidity Range Operating
40 - 85%