Zyxel NWA1123-AC Pro - Radio access point - Wi-Fi 5 - 2.4 GHz, 5 GHz - wall / ceiling mountable

Code: NWA1123ACPRO-EU0101F
Brand: ZyXEL
Warranty: Unknown
For illustrative purpose only
Product is temporarily unavailable.
Registered users can submit a written request and we will try to find it for you.
Request an offer
Product Description
Zyxel NWA1123-AC Pro - radio access point - Wi-Fi 5
Device Type
Radio access point
Form Factor
Wall / ceiling mountable
Localisation
Europe
Data Link Protocol
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Frequency Band
2.4 GHz, 5 GHz
Capacity
Maximum number of configured SSIDs: 16
Included Accessories
PoE injector, wall/ceiling mounting plate
Power Over Ethernet (PoE) Supported
PoE
Dimensions (WxDxH)
20.39 cm x 19.17 cm x 3.47 cm
Weight
445 g
Device Type
Radio access point
Width
20.39 cm
Depth
19.17 cm
Height
3.47 cm
Weight
445 g
Localisation
Europe
Form Factor
Wall / ceiling mountable
Connectivity Technology
Wireless
Data Transfer Rate
1300 Mbps
Line Coding Format
DBPSK, DQPSK, CCK, 64 QAM, 256 QAM, BPSK, QPSK, 16 QAM
Data Link Protocol
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Remote Management Protocol
SNMP, SSH, CLI
Frequency Band
2.4 GHz, 5 GHz
Capacity
Maximum number of configured SSIDs: 16
Features
VLAN support, MAC address filtering, IPv6 support, Multiple SSID support, reset button, Maximum Ratio Combining (MRC), 3T3R MIMO technology, Low Density Parity Check (LDPC), Transmit Beam-forming (TxBF) ready, DHCP client, Cyclic Delay Diversity (CDD), Maximum Likelihood Demodulation (MLD)
Encryption Algorithm
TLS, PEAP, TTLS, WPA, WPA2, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise, WEP
Authentication Method
RADIUS, Radio Service Set ID (SSID), Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, Wi-Fi CERTIFIED, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az, IEEE 802.11ac, IEEE 802.3au, IEEE 802.11ab
Antenna
Internal
Gain Level
5 dBi
Interfaces
2 x 1000Base-T (PoE) - RJ-45
Included Accessories
PoE injector, wall/ceiling mounting plate
Cables Included
1 x network cable
MTBF
1,005,235 hours
Compliant Standards
EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, FCC Part 15 B, FCC Part 15 C, IEC 60950-1, EN 60950-1, FCC Part 15 E, EN 300 328, BSMI CNS 14336-1, EN 301 489-1, LP0002, EN 301 893, EN 301489-17
Power Over Ethernet (PoE) Supported
PoE
Power Device
Power injector
Power Consumption Operational
12.48 Watt
Min Operating Temperature
0 °C
Max Operating Temperature
50 °C
Humidity Range Operating
10 - 90% (non-condensing)